-
1ft for $1.82
-
5ft for $6.32
-
10ft for $12.03
3/16" heat shrink tubing is a good size for sealing larger solder connections like Deans Ultra connectors (with smaller than 12AWG wires) and 2-4mm bullet connectors (4mm bullet connectors shown in the image below). It can fit up to 2 ribbons (3x conductors fused together) of 22AWG servo wire and will shrink tightly around as few as one ribbon or twisted set.
This polyolefin heat shrink tubing starts to shrink at about 212°F, is rated for 275°F continuous operation, is split resistant, mechanically tough, and has a 2:1 shrink ratio. It is not crystal clear, but clear enough to read through and discern color codes for parts like resistors.
Please take note when ordering: All orders under 5ft will be supplied in 1ft lengths (so if you order 4ft you'll get 4 1ft pieces). Any quantity 5ft or greater will be custom cut to length. However, if you order 10ft, you will receive two 5 ft lengths.
Connectors (PDF) |
 |
 |
 |
|