-
1ft for $1.37
-
5ft for $4.76
-
10ft for $9.07
3/32" heat shrink tubing is a good size for sealing smaller solder connections like single wire-to-wire 20-26AWG solder connections (20AWG solder connection shown in the image below). It will fit snugly over a pair of 22AWG wires, and very snugly over one ribbon (3x conductors fused together) of our Deluxe 26AWG servo wire. 3/32" tubing will shrink tightly over a single 26AWG wire. It can also be used over individual 0.1" connector terminals as shown below.
This polyolefin heat shrink tubing starts to shrink at about 212°F, is rated for 275°F continuous operation, is split resistant, mechanically tough, and has a 2:1 shrink ratio. It is not crystal clear, but clear enough to read through and discern color codes for parts like resistors.
Please take note when ordering: All orders under 5ft will be supplied in 1ft lengths (so if you order 4ft you'll get 4 1ft pieces). Any quantity 5ft or greater will be custom cut to length. However, if you order 10ft, you will receive two 5 ft lengths.
Connectors (PDF) |
 |
 |
 |
 |