.100" (2.54mm) connectors are by far the most popular size of electronics connector currently in use. They're found in nearly every variety of electronic equipment from personal computers to radio control helicopters, and are very useful for electronics prototyping, general wiring, and low-cost circuit design. Unless you need something much smaller, or have to handle higher currents, there really isn't much reason to use a different size of connector. Below you'll find enough types and sizes of terminals, housings, and headers to satisfy most project needs.
Gold Terminals for .100" Rectangular Housings and Universal & Futaba J Servo Connectors
These terminals fit all of the .100" housings sold below (as well as the servo connectors sold here). Both female and male terminals fit into the same housings (there aren't two genders of housing). Gold plating gives these terminals the ability to withstand high wear in abusive environments and handle large currents with very low contact resistance. We also sell crimping tools for these terminals. Please note that these female and male terminals will NOT work with our .100" Latching Polarized (LP) Connectors.
.100" Connector Housings
The housings below will accept both the female and male terminals sold above. These housings are not "sleeved" in any way, so the male terminals will protrude from the end of the housing. If you're looking for an variety of connector sizes you might consider our Deluxe Connector Kit - Version II which includes a selection of all of the sizes we carry at a heavy discount.
-
10pcs for $1.75
-
100pcs for $11.38
-
300pcs for $27.30
-
1,000pcs for $62.56
1x1 housing can be used for single wire connections; perhaps a removable receiver antenna.
-
10pcs for $1.93
-
100pcs for $12.57
-
300pcs for $30.16
-
1,000pcs for $69.12
1x2 housing can be used for double wire connections like batteries.
-
10pcs for $2.12
-
100pcs for $13.76
-
300pcs for $33.02
-
1,000pcs for $75.67
-
10,000pcs for $454.02
The proclaimed "economy servo connector" is our hardware of choice for making servo connectors.
-
10pcs for $2.30
-
100pcs for $14.95
-
300pcs for $35.88
-
1,000pcs for $82.22
-
10pcs for $2.48
-
100pcs for $16.14
-
300pcs for $38.74
-
1,000pcs for $88.78
-
10pcs for $2.67
-
100pcs for $17.33
-
300pcs for $41.60
-
1,000pcs for $95.33
Could be used for a Y-connector.
-
10pcs for $2.85
-
100pcs for $18.52
-
300pcs for $44.46
-
1,000pcs for $101.89
-
10pcs for $3.03
-
100pcs for $19.72
-
300pcs for $47.32
-
1,000pcs for $108.44
-
10pcs for $3.22
-
100pcs for $20.91
-
300pcs for $50.18
-
1,000pcs for $114.99
-
10pcs for $3.40
-
100pcs for $22.10
-
300pcs for $53.04
-
1,000pcs for $121.55
-
10pcs for $3.58
-
100pcs for $23.29
-
300pcs for $55.90
-
1,000pcs for $128.10
-
10pcs for $2.45
-
100pcs for $15.93
-
300pcs for $38.22
-
1,000pcs for $87.59
2x2 housing can be used for single wire connections; perhaps a removable receiver antenna.
-
10pcs for $2.87
-
100pcs for $18.63
-
300pcs for $44.72
-
1,000pcs for $102.48
2x3 housing can be used for single wire connections; perhaps a removable receiver antenna.
-
10pcs for $3.28
-
100pcs for $21.34
-
300pcs for $51.22
-
1,000pcs for $117.38
2x4 housing can be used for single wire connections; perhaps a removable receiver antenna.
-
10pcs for $3.70
-
100pcs for $24.05
-
300pcs for $57.72
-
1,000pcs for $132.28
2x5 housing can be used for single wire connections; perhaps a removable receiver antenna.
-
10pcs for $4.12
-
100pcs for $26.76
-
300pcs for $64.22
-
1,000pcs for $147.18
Standard 0.1" Header Strips
-
1 for $0.61
-
10 for $4.27
-
100 for $34.15
-
300 for $87.08
Use these gold headers to build your own electronics or repair bent/broken headers in your receiver. Mates with our .1" connectors. Comes in 40 pin strips which are easily broken into smaller sections.
-
1 for $0.71
-
10 for $4.95
-
100 for $39.63
-
300 for $101.07
Use these gold headers to build your own electronics or repair bent/broken headers in your receiver. Mates with our .1" connectors. Comes in 40 pin strips which are easily broken into smaller sections.
-
1 for $1.10
-
10 for $7.70
-
100 for $61.58
-
300 for $157.02
Use these gold headers to build your own electronics or repair bent/broken headers in your receiver. Mates with our .1" connectors. Comes in 2x40 pin strips which are easily broken into smaller sections.
-
1 for $1.43
-
10 for $9.98
-
100 for $79.86
-
300 for $203.65
Use these gold headers to build your own electronics or repair bent/broken headers in your receiver. Mates with our .1" connectors. Comes in 2x40 pin strips which are easily broken into smaller sections.
-
1 for $1.59
-
10 for $11.13
-
100 for $89.01
-
300 for $226.96
Use these gold headers to build your own electronics or repair bent/broken headers in your receiver. Mates with our .1" connectors. Comes in 3x40 pin strips which are easily broken into smaller sections.
-
1 for $4.45
-
10 for $31.13
-
100 for $249.00
-
300 for $634.96
Use these gold headers to build your own electronics or repair bent/broken headers in your receiver. Mates with our .1" connectors. Comes in 3x40 pin strips which are easily broken into smaller sections.
-
1 for $1.14
-
10 for $7.98
-
100 for $63.86
-
300 for $162.85
Mates with our other .100" connectors. Comes in 40 pin strips which can be broken into smaller sections.
-
1 for $1.96
-
10 for $13.70
-
100 for $109.58
-
300 for $279.42
Mates with our other .100" connectors. Comes in 40 pin strips which can be broken into smaller sections.
-
1 for $1.47
-
10 for $10.27
-
100 for $82.15
-
300 for $209.48
Mates with our other .100" connectors. Comes in 80 pin strips which can be broken into smaller sections.
-
1 for $2.85
-
10 for $19.98
-
100 for $159.86
-
300 for $407.65 - OUT OF STOCK!!
Mates with our other .100" connectors. Comes in 80 pin strips which can be broken into smaller sections.
Specialty 0.1" Header Strips
-
1 for $0.86
-
10 for $6.04
-
100 for $48.29
-
300 for $123.13
These gold headers have long pins on both sides which let you join two female connectors. They're also great for prototyping on a breadboard. Mates with our .1" connectors. Comes in 40 pin strips which are easily broken into smaller sections.
-
1 for $1.42
-
10 for $9.96
-
100 for $79.71
-
300 for $203.07
These gold headers have long pins on both sides which let you join two female connectors. They're also great for prototyping on a breadboard. Mates with our .1" connectors. Comes in 2x40 pin strips which are easily broken into smaller sections.
-
1 for $2.80
-
10 for $19.61
-
100 for $156.86
-
300 for $399.98
These gold headers have long pins on both sides which let you join two female connectors. They're also great for prototyping on a breadboard. Mates with our .1" connectors. Comes in 3x40 pin strips which are easily broken into smaller sections.
-
1 for $0.86
-
10 for $6.04
-
100 for $48.29
-
300 for $123.13
1,000 for $306.12
For making compact electronics.
-
1 for $0.86
-
10 for $6.04
-
100 for $48.29
-
300 for $123.13
-
1,000 for $306.12 - OUT OF STOCK!!
For making compact electronics.
-
1 for $0.96
-
10 for $6.75
-
100 for $54.00
-
300 for $137.70
-
1,000 for $357.14
For making compact electronics.