-
10pcs for $1.95
-
100pcs for $11.70
We designed this circuit board to help with making servo connections, especially with some of the newer, smaller servo connectors that can be difficult to work with. The board has been designed to accommodate a number of different connectors in different configurations, and should allow you to convert one type of connector to almost any other connector.
The top end of the board has surface mount pads for 1.00mm, 1.25mm, 1.50mm, and 0.1" headers (all available from Hansen Hobbies). Servo wires can also be soldered directly to the pads. The bottom end of the board has two sets of holes for wires or 0.1" header pins.
In the images below there are three examples of finished adapters. The first simply plugs into a single set of male pins and doubles it to two sets - now two servos can be plugged into the channel. The second shows a 1.50mm to 0.1" converter. This could be used to plug a device with a standard 0.1" servo connector (like an ESC) into a Spektrum AR6300 receiver. The last example is the opposite of the previous, and could be used to plug a Spektrum DSP60J servo into a standard 0.1" receiver header. For more info on connector options click on the instructions link below.
The pcb's are provided on a strip or panel with score-lines that can be broken apart by hand. Also provided is clear heat shrink tubing to cover the finished boards.
Universal Servo Connector Adapter PCB Instructions (PDF)Connectors (PDF)
 |
 |
 |
 |
 |
 |
 |