-
3pcs for $1.95
-
12pcs for $5.46
-
30pcs for $9.56
We designed this printed circuit board specifically for making Y-leads. The pcb has cutouts for the servo wire to pass through so the solder joints have strain relief. The solder pads are sized to accomodate wire down to 20AWG. Extra-heavy copper traces on both sides of the board allow currents in excess of 12 amps. Also included is clear heatshrink to cover the finished board. This little pcb is a vast improvement over trying to twist together and heat-shrink each set of wires.
We also sell a mini version for 28-32AWG wire - the sixth photo below shows the two side by side.
Connectors (PDF)